Re: Installation guide for Views 5.x?
Hi, Please have a look followings link.. http://www.vtexan.com/category/view5install/Regards,Milton
View ArticleRe: Disable easy_install for Centos6
The VMware Player Easy Install is pretty useful but in certain cases, we want it disabled. Inside VMware Player settings, there is not an option to disable Easy Install so here is a quick trick/tip...
View ArticleRe: vram setting in Workstation 8?
Check the screenshot Windows 7 VM automaticlly enabled 3d support.Just skipp VMCI-driver.Is your system install 3d support enable driver?Regards,Milton
View ArticleRe: datastore shows 40% used, but 0 in size
The VI client is not seeing the correct NFS datastore size, you can correct this by: 1. Waiting until the next time the VI client polls for the datastore size2. Run the following command on one of the...
View ArticleRe: mac address change issue
After extensive troubleshooting I fixed the issue by commenting out the SUBSYSTEM line from /etc/udev/rules.d/70-persistent-net.rules corresponding to eth0. Thank you for your assistance.
View ArticleCloning a VM
Can we create a clone of a VM which have snapshots in it. ??? I am getting error - a general system error occurred tools exited without quiescing vm
View ArticleRe: VLAN Configuration on ESXi Hosts
As your security purpose you don't wanna give access your VLAN to different VLAN.So you just use access port and trunk when you connect Vswitch1 to Vswitch2 .Also make sure that you don't route your...
View ArticleRe: Split Screen on Workstation 7
This may help you .. http://superuser.com/questions/247208/how-to-make-vmware-workstation-use-multiple-windows-for-vms-instead-of-tabbed-diRegards,Milton
View ArticleRe: ESXi Networking
The main theme is when you are connecting with vswitch to vswitch in this case you have to configure this port trunk.All 4 NIC should be access port.Regards,Milton
View ArticleRecovering Lost DataStore ESXi 5.1
Hi Guys. I need help to mount a VMFS file system lost. My host turned off some virtual machines and I saw that the datastore2 was unavailable. After reboot the hypervisor it didn't mount again, and I'm...
View ArticleRe: Recovering Lost DataStore ESXi 5.1
Additional information. ~ # partedUtil getptbl "/vmfs/devices/disks/mpx.vmhba2:C0:T1:L0"unknown89226 255 63 1433418544
View ArticleRe: I would like to use vCenter as evaluation.
Is this ? 2013-07-21T00:41:25.078Z| vmx| I120: Log for VMware ESX pid=6550 version=5.1.0 build=build-1065491 option=Release2013-07-21T00:41:25.078Z| vmx| I120: The process is...
View ArticleRe: Cloning a VM
Yes cloning VM with the snapshot is possible. Please note that when you clone the VM snapshot the destination VM will consolidate the snapshot disk to the base disk.
View ArticleRe: 仮想OSのWindowsサーバCドライブ拡張について
こんにちは。どうしてもC:のパスを拡張したい場合は、(Windows停止するものとして)追加した仮想ディスクを「NTFSフォルダーにマウント」することができます。 1. 仮想ディスクを追加(オンラインで認識できなかったら、Windows再起動)※既存の仮想ディスク(VMDK)を拡張するのではなく、別の仮想ディスクを追加します。2....
View ArticleRe: 仮想OSのWindowsサーバCドライブ拡張について
あ、すみません。 スナップショット中は仮想ディスクの拡張はできませんでしたね。※実際にやろうとしてみたら、グレーアウトしていて拡張できませんでした。※仮想ディスクの追加はできます。...
View ArticleRe: I would like to use vCenter as evaluation.
Thank you.vCenter license remain 47days,ESXi license looks it expire on 2013/09/12.I installed ESX5.1 in Virtualbox and 2GB memory.
View ArticleRe: How to find out if my ESX cluster is undergoing rolling upgrade
One way of doing that would be to look at the events, that an upgrade will cause.Have a look at Events – Part 7 : Working with extended events – Update Manager, to see if that answers your...
View ArticleRe: SRM 5 and powercli
I'm afraid not.Unfortunately the SRM functions we provide in our book are only to manage the SRM plan(s). You can look for an indicator of the SRM protected VMs by looking at the name of the harddisks,...
View Article