Re: how to set up vmware channel between primary and secondary vCenter...
Then it's quite strange, it should work. Have you configured VLAN10 on the dvSwitch port group?Right click on the portgroupClick Edit SettingsClick VLANEnsure VLAN 10 is assigned
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
In this case, if I use a non-private IP with default gateway and DNS (on both primary and secondary) for Channel network, that should work, right?That means, Channel IPs on primary and secondary are...
View ArticleMove VMs serially
Hi Community, How can I get all the VMs in a datastore and then storage vMotion them, one at a time, to a different datastore? Here's what I tried, but it kicked off 8 svMotions at once- not what I...
View ArticleClik here to view.
Re: how to set up vmware channel between primary and secondary vCenter...
> Have you configured VLAN10 on the dvSwitch port group?Right click on the portgroupClick Edit SettingsClick VLANEnsure VLAN 10 is assigned Yes, I have done that, but it does not work.
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Not quite sure what the root cause is... The following is from the vCSHB documentation. Channel Network connection(s) configured with the following:Static IP address in a different subnet than the...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
> VLAN10, is there a gateway?I don't think there is gateway for VLAN10. Do I need to config one for the vDS? If so, how?
View ArticleRe: Creating snapshots failing
Try to clone the virtual machine and make it as single vmdk disk and check if it works.
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
BTW, I've configured a multiple-NIC on both primary and secondary. Both vNICs (on both primary and secondary) for public IP/mgmt IP and Channel IP use the same dvUplink (i.e., physicalnetwork...
View ArticleRe: esxi and vcenter server
Ensure that your vcenter version should always be equivalent or the newer version when compared to the ESXi hosts which are managed by it (example :if esxi is 5.1 then you should have vcenter 5.1 GA...
View ArticleRe: RAM usage after upgrading to ESXi 5.1 U1
Is that consistent ? check the host memory usage on all the virtual machines and check if that is at par with the host. May be your virtual machines uses more memory which might have caused that.
View ArticleClik here to view.
A general system error occured: Migration failed while copying data. Already...
A couple of issues. When I vmotion a vm from one host to another, validation suceeds but after 14% it gives this error Also, I changed DRS automation level to manual but when i try to power on a vm,...
View ArticleRe: RHEL 6.x Support for JEOS
Hi, JeOS is not Studio specific. You may want to try theVirtual Appliances group.
View ArticleRe: Move VMs serially
That is indeed a known "issue", the better part of the actual svMotion is done by independent tasks in vSphere.Running the Move-VM cmdlet with the RunAsync parameter and then monitoring the state of...
View ArticleRe: how to get around misfeatures
The well known autohide bug has NOT been fixed in Ubuntu 13.04 / VMware Player 5.0.2. This one has been around for years and is a complete deal killer for me. When will it be fixed?
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Wait a sec, so do you use both Standard switch and Distributed switch?Standard switch for ESXi Management and dvSwitch for vCSHB? Also, could Primary server ping Secondary management IP? Is it only...
View ArticleVmware view can not connect the virtual desktop
Dear All, Some of our laptop can connect the virtual desktop and another one using the same account ,same password ,login the same virtual desktop ,the screen will show black screen . I install...
View ArticleRe: Certificate issues with VMware View 5.1 and Igel ThinClient
Could you explain importing of the VDM and the root certificate? Could you please post how you did this as I cannot figure this out.
View ArticleHow to add extra memory to root file system in UNIXware7.1.3 VM
Sir I am posting the same topic again because I am unable to reply by pressing reply radio button so I am requesting you to check the functionality of reply radio button. Sir I am new to sco unix so...
View ArticleESXi Host Memory Capacity
Hi, I'm just wondering how people capacity manage their ESXi hosts in regards to memory?? In our old 4.1 environment we disable TPS so large pages werent used and we saw around a 20% redunction on our...
View ArticleHow to restart a suspended virtual machine?
I tried to update Fusion 4.0 to 4.1; after the update failed I could not restart Fusion. I have uninstalled and reinstalled Fusion 4.0. After reinstalling Fusion 4.0, I am able to see the suspended...
View Article