Hello All,
This is my first post so hopefully I am doing it right.
I have a Dell T610 server, 2 seagate x2TB SAS drives, 32mb ram, 2xIntel Xeon E5620.
My problem is if I add a 6gb ISO to the datastore, which is 1.8TB this takes 60mins, I have another custom built server and the time is 10-20mins to transfer an ISO. You can see on the same network in the picture, one server is 8mins and the server with the data problem 40+.
The server is connected to a Cisco Switch at my desk for fault finding, so no routing,
I have rebuilt the server several times and no joy, I have the esxi now installed on an internal USB drive, thinking this might speed the drives up.
In the bios turned on hardware acceleration, tried different Raid configurations, Raid 1 and now Raid 0.
To me this is a simple task, 6gb transfer time 60 mins, not good.
I have updated the BIOS today also on the server.
Ran hardware tests on the server, all is ok.
Any Ideas?
Thanks,
K